hakko 927 esd soldering station unit programmable digital

** NOTE** please view attached photos for reference on how to perform modification. Your unit is now converted to read in C temperature scale if you at anytime wish to return to F you must repeat the process to change the unit to read F Re calibrate your soldering station ( press and hold keys 4/5 simulataneously to enter calibration mode ).Details about XYTRONIC LF-2900 100W Temperature Controlled Soldering Station w/ Stand-ESD Safe. Reassemble the Station, Be sure to replace the Spacers on the PCB exactly as they were removed. Hakko 927 ESD Digital Soldering Station Unit Programmable.*** NOTE *** Please note that the locations that are currently unused will need to be Desoldered To be able to relocate and Insert the leads.Solder the jumper to its new location.Desolder the jumper from ( JF ) and move it over 1 spot to the left to its new location labeled ( JC).Pricing and Availability on millions of electronic components from Digi-Key Electronics. Locate the jumper wire labeled ( JF) this jumper can be found in the center of the board directly above the push button for ( Pin pad #8). FA400-04 Bench Top Soldering/Desoldering Fume, Smoke Extraction Unit ESD Safe from American Hakko Products, Inc.Solder the LED to its new location on the board.Smaller soldering irons are ideal for light electronics work while larger irons can be used for heavy jobs. Desolder and remove the LED from ( L4F) and move the ED up to (L4C) immediately above the current position They are lighter and offer users more flexibility than working with soldering guns. Locate the red LED ( L4F )on the upper right hand of the PCB.Remove The 4 Phillips head screws and spacers securing the PCB to the case.Remove the 2 phillips Head screws on the backside of the unit as- well as the two phillips head screws on the Front bottom portion of the unit to remove the top cover and expose the Temperature setting PCB located in the upper half of the unit.To change between C and F on the display of the 927 station: *** PLEASE NOTE THIS PROCESS REQUIRES DESOLDERING AND RE-SOLDERING OF TWO COMPONENTS

Modification of any HAKKO product will void the warranty. NOTE: The following information is provided as-is and is not supported by HAKKO. Replacement Temp setting PCB ( 927-205 ) are no longer available for the 927 soldering station.

Hakko 927 esd soldering station unit programmable digital